FABRICATION AND DESIGN OF SPIRAL TUBE HEAT EXCHANGER

  • Dr. B. jayachandriah Professor of Mechanical Engineering and Vice –principal Srikalahasteeswara Institute of Technology, Srikalahasti, Chittor Dt, A.P
  • M. Uday kumar Final B.Tech Students Srikalahasteeswara Institute of Technology, Srikalahasti, Chittor Dt, A.P
  • R. Jagaesh Final B.Tech Students Srikalahasteeswara Institute of Technology, Srikalahasti, Chittor Dt, A.P
  • T. M Vamsi krisha Final B.Tech Students Srikalahasteeswara Institute of Technology, Srikalahasti, Chittor Dt, A.P
Keywords: Spiral coil Heat Exchanger, effectiveness, Thermocouples

Abstract

Spiral tube Heat exchangers is a helically coiled heat exchanger, A helically coil-tube heat exchanger is generally applied in industrial applications due to its compact structure, larger heat transfer area and higher heat transfer capability, etc.

References

[1] Ali me. Experimental investigation of natural convection from vertical helical coiled tubes. International Journal of Heat and Mass Transfer 1994; 37:665–671.
[2] Churchill SW. Fully developed laminar convection from a helically coil. Chemical Engineering Communication 1981; 9:185–200
[3] Kumar, V., Saini, S., Sharma, M. and Nigam, K.D.P. Pressure drop and heat transfer in tube in tube helical heat exchanger. Chem. Eng Sci, 61 (2006): 440-4416.
[4] Jayakumar, J. et al V.H. Response of a two phase system subject to oscillations induced by the motion of its support structure. Int Comm Heat Mass Transf, 29 (2002): 519–530.
[5] M.Deshpande., et,. al., “Study Of Hydrodynamics Of Horizontal Spiral Coil Tube.” International Journal of Advanced Engineering Research and Studies, Vol. 1, Issue. 3, PP – 112 – 114, ISSN No. 2249 – 8974, Apr –June 2012
Published
2014-05-31
Section
Original Article